Photron Fastcam MC2-2K
Purpose Built for Production Line Fault Find
ing
The Fastcam MC2 is an affordable high speed camera specifically
designed to provide production line engineers with the tools they need
to be able to quickly locate and fix costly faults on the production
line.
Its twin camera heads and tiny (35mm or 1.5" cubed) and very light
sensitive and are connected to the processor via 7m (23 foot) flexible
cables to enable the Fastcam MC2
to be easily mounted on and around trouble hot spots, and does not
require bulky bracketry or an employee permanently standing by to hold
the camera. When a fault occurs, a signal can be sent via the TTL or
switch closure connector on the front panel to trigger the cameras to
make a high speed recording that shows exactly what caused the
blockage, jam or other common but troublesome problem.
Recording at speeds as fast as 10,000 frames, or pictures, per
second, the Fastcam MC2 provides the tools required to find and fix
problems, improve line efficiency, and so provide you a fast ROI.
Available in three models (both color or monochrome versions)
of 500 fps top speed, 2,000fps, and the top of the range 10,000fps, and
with 1GB or 2GB memory options to provides up to eight seconds record
time at 1,000 fps (4sec with the 1GB option). Gigabit Ethernet, or the
optional RS-422 remote control keypad with built in 5" LCD display,
make setting up the camera and downloading recorded high speed videos
easy and intuitive.
The Fastcam MC2 is a powerful tool, especially given the
pressure of maintaining optimum line speeds and efficiency in today's
ever more competitive world.
Highlights:
- 512 X 512 resolution to 2,000 fps
- 10 micron pixels
- 8-bit Monochrome or 24-bit Color Sensor
- 6 microsecond Global Electronic Shutter
- Supports from one to two camera heads
- Cube camera head uses C-Mount
- Pencil Cam head uses NF-Mount
- 1000/100 Gigabit Ethernet Interface
- Camera Control Software, PFV3 is freeware